Professional Intelligent Manufacturer of High and Low Voltage DC Contactors - Aokai Electric
For Switching DC Current 12v Dc Reversing Contactor by Aokai Electric
Product details of the 12v dc reversing contactor
Quick Overview
The detailed size for 12v dc reversing contactor depends on our cutsomers' final decision. This product is highly regarded in the market for its best quality. 12v dc reversing contactor produced by Aokai Electric enjoys a high reputation among customers.
Product Information
Compared with similar products in the market, the 12v dc reversing contactor of Aokai Electric has the following main advantages.
Features
◪ Continuous 100A load.
◪ It has two sets of normally open and two sets of normally closed contacts.
◪ Coil power consumption ≤24W.
◪ The insulation resistance is up to 100MΩ (1,000VDC), the withstand voltage between the contact and the coil is 3.5kV.
◪ IP protection level: IP67.
◪ Compliant with IEC 60664-1, GB/T14048.1 and GB/T14048.4 requirements.
◪ Compliant with RoHS (2015/863/EU), REACH (1907/2006/EC) requirements.
◪ Safety certificate: CE.
Specification
|
Performance Parameters (at 23℃) |
||
|
Contact Arrangement |
2K (2NO), 2B (2NC) |
|
|
Contact Resistance |
≤30mΩ |
|
|
Contact Voltage Drop |
≤80mV (at 80A) |
|
|
Overload Current |
≤8le, ≯1s |
|
|
Temperature Range |
-40℃~85℃ |
|
|
Load Terminal |
M8 External Thread |
|
|
Humidity |
5%~95%RH |
|
|
External Dimension |
105mm*62.5mm*98mm |
|
|
Operating Duty |
Continuous |
|
|
Electrical Durability with Load (Resistive) |
≥20,000 Times |
|
|
Load Wiring Torque |
8-10N.m |
|
|
Pull-In Voltage |
≤70% Us |
|
|
Drop-Out Voltage |
5%-40% Us |
|
|
Contact Bounce Period |
≤5ms |
|
|
Pull-In Time |
≤30ms |
|
|
Drop-Out Time |
≤10ms |
|
|
Dielectric Strength |
Between Main Contacts |
50Hz/60Hz 1,500VAC/1min |
|
Between Main Contacts and Coil |
50Hz/60Hz 1,500VAC/1min |
|
|
Insulation Resistance |
Initial State |
100MΩ 1min |
|
After Electrical Life |
50MΩ 1min |
|
|
Shock |
Stability |
20g (Power On) |
|
Strength |
50g |
|
|
Vibration |
3.5g, 10~200Hz, 1/2 Sine Wave (Power On) |
|
|
Mechanical Durability |
≥100,000 Times |
|
|
Coil Wiring Torque |
0.5-0.8N.m |
|
|
ADC100D Coil Parameters |
|||||
|
Coil Voltage |
Pull-In Voltage |
Drop-Out Voltage |
Starting Coil Resistance |
Holding Coil Resistance |
Coil Power Consumption (Holding) |
|
12V |
≤70%Us |
5%-40%Us |
2.4Ω±10% |
24Ω±10% |
24W±10% |
|
24V |
≤70%Us |
5%-40%Us |
9.6Ω±10% |
96Ω±10% |
24W±10% |
|
36V |
≤70%Us |
5%-40%Us |
21.6Ω±10% |
216Ω±10% |
24W±10% |
|
48V |
≤70%Us |
5%-40%Us |
38.4Ω±10% |
384Ω±10% |
24W±10% |
|
60V |
≤70%Us |
5%-40%Us |
60Ω±10% |
600Ω±10% |
24W±10% |
|
72V |
≤70%Us |
5%-40%Us |
86.4Ω±10% |
864Ω±10% |
24W±10% |
| Packaging Specifications | |||||||
| Product Model | Packaging | Min. QTY of Inner Packaging | Carton Size(LxWxH cm) | Net Weight/PCS(Max.) g | Total QTY(pcs) | Net Weight(Max.) kg | Gross Weight(Max.) kg |
| ADC100D | Pearl Cotton+Carton | 10 PCS/Layer | 43.5x28x26 | 990 | 20 | 19.8 | 20.8 |
| Note:1. Only one example of various typical packaging specifications for each product category is listed for reference.2. The actual weight of the packaging will fluctuate with the ambient humidity. For the specific batch weight, please contact your dedicated sales personnel. | |||||||
Product Introduction
This series DC Contactor is used to control the motor reversing, which is widely used in electromobiles, electric forklifts, electric winches, engineering machinery, etc.
Model Coding
Wiring Diagram
Outline Installation Dimension Drawing
Company Information
Zhejiang Aokai Electric Co., Ltd (Aokai Electric) is a company that integrates R&D, processing and production, andmainly focuses on sales of High Voltage Contactor. Our company values the needs and complaints of consumers. We seek development in demand and solve problems in complaints. Moreover, we continuously take innovation and improvement, and strive to create more and better services for consumers. Our products are of excellent quality and favorable price, please feel free to contact us for quotation!
